Debriscap DC 400 Fits a SMOOTH wall 4" ID with round adjustable contact pads. The contact pads can be adjusted to allow for proper fit if the size is larger or smaller. When you have found the proper location for the cap, simply rotate the handle (DO NOT FORCE IT) until you feel the cam lock into position. Since each contact pad is adjustable, you may feel some resistance which will cause the cam to not lock into postion. Shorten (1) or more of the adjustable pads to arrive at the proper tension. The handle should align with the hole in the base of the cap (remove the rubber plug to utilize locking system).
Download the DC 400 PDF
Debriscap DC 425 Fits a SMOOTH wall 4 1/4" ID with round adjustable contact pads. The contact pads can be adjusted to allow for proper fit if the size is larger or smaller. When you have found the proper location for the cap, simply rotate the handle (DO NOT FORCE IT) until you feel the cam lock into position. Since each contact pad is adjustable, you may feel some resistance which will cause the cam to not lock into postion. Shorten (1) or more of the adjustable pads to arrive at the proper tension. The handle should align with the hole in the base of the cap (remove the rubber plug to utilize locking system).
Download the DC 425 PDF
Debriscap DC 475 Fits a SMOOTH wall 4 3/4" ID with verticle adjustable contact pads. The contact pads can be adjusted to allow for proper fit if the size is larger or smaller. When you have found the proper location for the cap, simply rotate the handle (DO NOT FORCE IT) until you feel the cam lock into position. Since each contact pad is adjustable, you may feel some resistance which will cause the cam to not lock into postion. Shorten (1) or more of the adjustable pads to arrive at the proper tension. The handle should align with the hole in the base of the cap (remove the rubber plug to utilize locking system).
Download the DC 475 PDF
Debriscap DC 4 X 5 Fits a SMOOTH or SCREW type wall 4 3/4" - 5 1/4" ID with verticle adjustable contact pads. The contact pads can be adjusted to allow for proper fit if the size is larger or smaller. When you have found the proper location for the cap, simply rotate the handle (DO NOT FORCE IT) until you feel the cam lock into position. Since each contact pad is adjustable, you may feel some resistance which will cause the cam to not lock into postion. Shorten (1) or more of the adjustable pads to arrive at the proper tension. The handle should align with the hole in the base of the cap (remove the rubber plug to utilize locking system).
Download the DC 4x5 PDF